3rd place: the quality of the car's light body is the best way to protect against UV radiation

3rd place: the quality of the car's light body is the best way to protect against UV radiation UV radiation is one of the common causes of damage to the car that can cause death. Although the rays of light in the cabin do not always penetrate, there should be no failure of the lamp. To protect the lamp from damage, you need to take a high-quality product from the manufacturer . To identify the best protection of the lamp from damage, you need to use the rules of operation of the lamp and the characteristics of the light beam. The beam is the result of scattering light rays and is affected by everything that smudges in front of the lamp. So, a white smudge on the road course, which emits about 30% more light than the previous one, can turn out to be the difference between life and death. The quality of the lamp is directly related to the protective coating of the body. The thicker the coating, the lower the reflector's beam is affected by UV radiation. The amount of radiation absorbed by the coating determines the quality of the lamp's light beam. So that's what it's all about – what is the secret of the lamp . What is the secret of the lamp? To create a special effect of the lamp, the coating must be elastic. Stretch film, in turn, is applied to the surface of the body. If the film is removed during operation, radiation can pass through the plastic lining of the body. The secret is to coat with sunscreen . When the film is placed, the surface of the body is exposed to sunlight not only in the summer, but also in winter. Under the sun, the film is able to protect the body from UV radiation. In order to avoid problems during Parking and to avoid the effect of UV rays on the body, it is necessary to apply the film on the torpedo, along with the weather stripping film. When placed under the film, the torpedo appears as a whitish bruise, which is formed on UV radiation. This bruise is formed due to the action of UV radiation and is responsible for the appearance of cracks and scratches on the body. The film should be applied to all areas of the torpedo, including the area near the rearview mirror. It is best to install the film in the same way, and in such a way that it covers the entire area. The next step is to cover the torpedo with a transparent film. It is made from thin film of cardboard and is applied in layers. On the torpedo, the film should be applied in several layers, so that it remains clean and in color. After the film is applied, remove it with a transparent scraper to make sure that the top layer is covered with film. If there are streaks, they will be removed along with the film. Apply the film with a scraper to the area where there are streaks. The scraper should be lifted up and placed along the entire length of the torpedo. It is best to apply the film along the entire length of the torpedo. The appearance of streaks on the body surface The first layer of film should be removed, so that the surface of the body is coated with a transparent film. The second layer of film should be applied, along with the first.